Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Device scheme 1:
1 – place of the measurement
2 – ON/OFF/TARE
3 - DISPLAY
4 - UNIT
Display scheme 2:
1 – negative weight
2 – tare function
3 - low battery
Operation instruction
1. Make sure there are batteries inside the device (2 x AAA). Batte-
ry lid is on the back of the device.
2. Place the scale on a flat, stable surface.
3. Turn of the device (buton 2 scheme 1).
4. Choose measurement unit (button 4 scheme 1)
5. Use tare function if you measure a substance placed in a vessel.
In order to do that, first place only the vessel on the scale and press
TARE. Wait until on the display there is a value 0 again.
6. Place measured substance on the scale. The display will show
measurement in a selected unit.
Safety instructions
1. The device is an accurate device, it should be handled with
care. Beware of hitting, shaking and falling.
2. It should not be exposed to strong vibrations and mechanical
loading.
3. It should not be exposed to immediate solar radiation.
4. The scale should be cleaned with a damp soft cloth. It should not
be drown in water and you should not use chemical and scraping
detergents
5. All the elements of the scale should be cleaned immediately
after having contact with grease, seasoning, vinegar and subtan-
ces with strong flavor or colour. Beware of the contact with citric
acid.
4
Werbung
