Axis Communications T98A-VE Series Installationsanleitung Seite 11

AXIS T98A-VE Series Installation Guide
Install the Devices
1. The included device mounting bracket can be used for attaching devices such as power supplies
or midspans. Attach these devices to the device mounting bracket with the supplied cable ties
or attached them to the DIN rail in the cabinet.
2. If applicable, attach the device mounting bracket to the cabinet base using the supplied screws.
3. Snap on the other devices required for the installation, for example an electrical safety kit (sold
separately), surge protectors, or switches to the DIN rail according to the manufacturers'
instructions. Additional DIN rails (not included) can be attached to the cabinet as required.
DIN rail
DIN rail
Page 11
Device mounting
bracket
Screw (2x)