Charging The Battery - Cleco 935377 Bedienungsanleitung

2 Dimensions (mm)
3

Charging the battery

Battery is only partly charged upon delivery.
It must be fully charged before initial use.

WARNING!
Non-matching batteries may cause the battery to overheat or damaged.
Only use original Apex Tool Group battery chargers 

as they are optimally matched to the battery.
Charging temperature
0 °C to +40 °C (32 °F to 104 °F).
With proper use, the battery can be charged at least 800 times (60 % capacity). Here, the following is
important:
Do not totally discharge the battery (< 17,5 V).

Follow the safety instructions printed on the battery and charger.

Fully charge new batteries or those not used for a long time.

2070b_1_5en_bedingt.fm, 13.10.2015
EN
Disharging temperature
0 °C to +45 °C (32 °F to 113 °F)
P1970E/INT 2015-06
Dimensions (mm)
2
23