Introduction; Installation; Mounting - Danfoss Link SCM Installationsanleitung

Installation Guide Danfoss Link™ SCM

Introduction

The Danfoss Link™ SCM (Simple Communication Module) is an
GB
electronic controller for turning the Away function ON/OFF in a
Danfoss Link™ system .
The Danfoss Link™ SCM is powered by 230 V~ .

Installation

The Danfoss Link™ wireless system's transmission range is suf-
ficient for most applications; however each building has different
obstacles affecting communication and maximum transmission
distance .
If communication problems occur Danfoss suggests to support
the system with repeaters . In exceptional cases the wireless
system may not be suitable for your installation .
Note: Be aware that installation and placement must be according
to local building regulations.

Mounting

5
VIFZT102 © Danfoss 03/2013