Device Description; Technical Data - Silca M-BOX Gebrauchsanleitung

M-BOX
The M-BOX device is used to connect Silca devices to the Internet through LAN or WI-Fi:
RW4 Plus,
FastCopy Plus,
Ezclone Plus,
RW4 with P-BOX,
FastCopy with P-BOX,
Ezclone with Plus-BOX
in order to copy vehicle keys with Megamos® Crypto transponder (ID48).
IMPORTANT Notes:
- Prepare an Internet connec on accessible via cabled LAN or a Wi-Fi router.
- RW4, FastCopy and Ezclone devices not connected to a P-BOX cannot make copies of ID48.
- For the list of vehicle makes and models whose keys can be copied, see the Silca publica ons on
Silca.biz, web or paper catalogues and the MySilca App.
- For general informa on about the Silca ID48 SOLUTION go to
Replacement Business ->Automo ve Technology -> Silca ID48"

TECHNICAL DATA

Power supply
Device power supply: 15
Universal AC/DC power supply conforming to cer fi ed IEC/EN 60950-1'.
IMPORTANT Notes:
- The M-BOX device must be powered through a universal charger and the cable provided with all RW4
Plus, FastCopy Plus, Ezclone Plus, RW4, FastCopy and Ezclone devices.
Environmental conditions
The M-BOX device will operate at ambient temperatures from -20°C to +55°C.
Dimensions
Length 157 mm
Width 275 mm
Height 38mm (105mm with antenna in ver cal posi on)
Weight
0.5 Kg.
Product identification
The Silca serial number / Mac Adress WI FI is given on the label under the device.
8

DEVICE DESCRIPTION

(+ o - 10%) - 700mA
Copyright Silca S.p.A 2016 - Vers.1
www.Silca.biz and select "Products->Key
English
www.