Cleaning, Care & Maintenance; Troubleshooting; Technical Specifications; Electrical Wiring - Buffalo CC039 Bedienungsanleitung

UK
Cleaning, Care & Maintenance
• A BUFFALO dealer or qualified technician should carry out repairs if required.
• Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or
performing maintenance.
• If necessary wipe the exterior with a soft cloth and warm soapy water.
• Dry thoroughly after cleaning.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not working

Technical Specifications

Model Voltage
CC039 230V 50Hz

Electrical Wiring

The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
3
Probable Cause
The appliance is not switched on Check the appliance is plugged in correctly
Safety cut out has activated
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Heating element has expired
Power Current
2900W 12.6A
and switched on
Allow unit to cool before pushing reset switch
(located on underside of unit)
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Cooking
Temperature
Surface
Range
Diameter
410mm 60-300ºC
Action
Dimensions
Weight
h x w x d (mm)
140 X 550 X 456 17.6kg