Cleaning And Maintenance - Buffalo DM067 Bedienungsanleitung

When produce becomes frozen blade will stop turning. Switch off the machine immediately to
protect blade motor
To avoid overflow and waste please make sure that the ingredients do not exceed 60% of the
capacity of the removable bowl (ice cream expands when being formed)

CLEANING AND MAINTENANCE

1. Unplug the appliance and wait for it to completely cool down before cleaning.
2. Wipe over the outside surface of the unit with a dampened cloth and polish with a soft dry cloth.
3. Wipe any excess food from the power cord.
4. Wash the removable bowl and accessories in warm soapy water and wipe dry.
Trouble Shooting
Fault
The unit is not working
The ice cream is too soft
The Ice Cream is too hard
The timer has not reached 0
but the machine has stopped
and the ice cream is hard
The blade is not turning
Probable Cause
The Unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Timer setting too short
Timer setting too long
The ice cream has frozen solid
stopping the blade from
turning. The motor protection
system has engaged to stop the
motor overheating
Blade not fitted to motor axis
correctly
Action
Check the unit is plugged in
correctly and switched on
Call BUFFALO agent or qualified
technician
Replace the plug fuse
Check Power Supply
Call BUFFALO agent or qualified
technician
Increase timer setting
Reduce timer setting
Allow the unit to cool before
attempting to restart.
Ensure the removable bowl is
fitted correctly and that the
blade has a good connection to
the motor axis