Using Your Ice Cream Maker; Cleaning, Care & Maintenance - Buffalo DM067 Bedienungsanleitung

Using Your Ice Cream Maker

• Place the removable bowl, with
ingredients, into the machine.
• For fastest results ingredients
should be pre-chilled.
• Fix blender blade to machine ensuring
that the blade connects well with the
motor axis (fig.1).
• Fit the transparent lid onto the machine
and lock into place.
• Turn the timer to the desired time
setting. The blender blade will start to
turn. After a short delay the compressor
will start and the bowl will start to chill.
The LED display shows the temperature
(fig.2).
• When the machine is running you can
increase/decrease the operating time by
turning the timer.
• You can stop the machine at any time
by turning the timer anticlockwise to
the "0" position.
• If produce becomes frozen, blade will stop turning. Switch off the machine
immediately to protect blade motor.
• To avoid overflow and waste, please make sure that the ingredients do not
exceed 60% of the capacity of the removable bowl (ice cream expands when
being formed).
Cleaning, Care & Maintenance
• Unplug the appliance and wait for it to completely cool down before cleaning.
• Wipe over the outside surface of the unit with a dampened cloth and polish with a soft dry cloth.
• Wipe any excess food from the power cord.
• Wash the removable bowl and accessories in warm soapy water and wipe dry.
Storage Of Ice Cream
Transfer finished ice cream into another container using a plastic scoop or a wooden spoon and store in
freezer. Do not use a metal scoop to avoid scratching the inside of the removable bowl.
DM067_ML_A5_v7_20210706.indb 5 DM067_ML_A5_v7_20210706.indb 5
1
2
Timer
UK
LED display
5
2021/7/6 09:59 2021/7/6 09:59