Mounting The Dome Camera - Eneo MPP-72A0020MIA Schnellinstallationsanleitung

Mounting the Dome Camera

The dome camera is for use in surface or pendent mounting applications, and the
mounting member must be capable of supporting loads of up to 10 lb (4.5 kg). (Pendent
mounting must use pendent mount accessory.)
The dome camera's mounting bracket should be attached to a structural object, such as
hard wood, wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the housing to secure
waterproofing.
CAUTION: Please reset the camera after 30 minutes when installing it in situations
colder than -10°C.
6
Plastic Anchors
Mounting Screws
Safety Lanyard (1x)
Dome Camera (1x)