Buffalo GL190 Bedienungsanleitung Seite 13

Fitting/Removing the Bowl
1. Turn Off the appliance.
2. Open the safety guard by turning it to the left
(GL190 & GL191) or lifting it above the mixer (GJ461).
3. Lower the bowl with the bowl handle.
4. Release the locking catches either side of the bowl.
5. Lift the bowl. The bowl is held in place by two pins
securing the handles to the cradle and a hole at the
back of the appliance which houses the lug on the
bowl lip.
6. Reverse the procedure to fit the bowl.
Note: Ensure the handle is fully pushed
back and the bowl is completely raised
or the mixer will not work.
Note: Regularly grease the bowl lift
mechanism to ensure smooth operation.
Changing the Mixer Attachment
1. Turn Off the appliance.
2. Open the safety guard by turning it to the left (GL190 & GL191) or lifting it above the mixer (GJ461).
3. Lower the bowl with the bowl handle.
4. Push the mixer attachment up and to the left to release it.
5. Insert the desired attachment. Push up and to the right to lock it into place.
6. Raise the bowl.
BUFFALO recommend the following uses for each attachment:
Spiral Dough
hook
Beater
Whisk
GL190-GL191_GJ461_ML_A5_v7_20180928.indb 13
Heavy mixes dough, pie pastry etc.
Firm mixes light pastry, cake/biscuit mix,
icings, fillings and mashed vegetables
Light mixes whipped cream, mayonnaise,
egg whites, pancakes and soufflés
3
Securing pins Locking catch
Suitable Gears: 1 Slow
Suitable Gears: 1, 2 Medium
Suitable Gears: 1, 2, 3 Fast
UK
Bowl handle
13
2018/9/28 16:02