Operating Status Display - Oase InScenio FM-Master EGC Gebrauchsanleitung

- EN -
Commissioning/start-up
The units are operated via the "Easy Control" app on your smartphone/tablet. Proceed as follows for starting up:
1. Install the "Easy Controlʺ app. (→ Installing the "OASE Easy Control" app )
2. Connect the InScenio FM-Master EGC to the power supply.
3. Establish the WIFI connection.
The smartphone/tablet can be connected to the InScenio FM-Master EGC in two ways (WIFI):
• The smartphone/tablet and InScenio FM-Master EGC are connected via a WIFI router.(→ Establishing a connection
to the WIFI router (router/cloud mode))
• The smartphone/tablet and InScenio FM-Master EGC are connected directly.(→ Establishing a direct WIFI connection
(access point mode))
The LED on the InScenio FM-Master EGC indicates the current operating status. (→ Operating status display
)

Operating status display

 A
The LED on the device indicates the operating status of the InScenio FM-Master EGC.
LED colour LED status
– Off
Green Lit
Flashing fast
Flashing slowly (2 seconds on,
1 second off)
Yellow Lit
Flashing fast
Flashing slowly (2 seconds on,
1 second off)
Red Flashing
Installing the "OASE Easy Control" app
iOS Android
16
Description
InScenio FM-Master EGC is switched off.
InScenio FM-Master EGC is ready for operation and in access point mode.
WPS is activated, InScenio FM-Master EGC is waiting for the router access data.
InScenio FM-Master EGC is ready for operation and connected to the router.
InScenio FM-Master EGC is starting up or is in update mode.
Firmware update in progress
InScenio FM-Master EGC is searching for a connection to the router.
Malfunction
Remedy:
• Disconnect from the power supply. Wait for 10 seconds then reconnect.
• Reset the InScenio FM-Master EGC to the factory default settings
• Carry out a Firmware_Update
How to proceed:
1. Open Google Play or App Store.
2. Search for the ʺOASE Easy Controlʺ app and install.
– Follow the instructions during installation.
3. Confirm the query "access to internal data of the unit".
– If access is permitted, individual product photos for identification of the sockets
can be created.
– The query appears during installation (Android) or when executing the app ((iOS).
The app appears on the display after successful installation.