Filling With Water - Arzum 1650 W Gebrauchsanweisung

USING TEA MAKER
• Your Arzum Çaycý Tea Maker heats up during operation; for this reason, do not
touch the hot surfaces of the appliance. Keep your hands away from the spout when
the water starts boiling.
• Do not use for any purpose other than boiling water.
Do not fill with any other liquids or solutions.
• A teapot MUST be placed on the kettle device when
the boiling switch is on . Otherwise, the appliance will
be delayed to pass to the energy saving position, even
when the water is boiled.
• When lifting the teapot to serve tea, pull the teapot
from its base after skimming its bottom off. By doing so,
any drops remaining in the bottom will be spilled out
inside of the kettle.
• Before using for the first time, wash the inside of your Arzum Çaycý Tea Maker
by putting in water. Boil water two to three times inside of the kettle, and replace
the water after each time. Make sure that the device is filled with water up to the
maximum level when doing this. After each time of boiling, pour out the hot water
and rinse the inside of the device with cold water.
• After boiling the water, some powder-like sediment may form due to the hardness of
the water. This is quite natural and has no adverse effects whatsoever on human health.

FILLING WITH WATER

• ALWAYS remove the appliance from its power base
unit when filling with water, preventing the water to be
spilled out on the tray.
• Do not fill with less than 0,5 liter of water or more
than 1,8 liter of water. If you attempt to boil a quantity of
water below the minimum level or above the maximum
level, the appliance may switch off rather early or the
boiling water may eject from the spout, respectively.
STEEPING TEA
• Unwind the power cord coiled around the power
base unit of your Arzum Çaycý Tea Maker and connect
to a grounded socket.
• It would be convenient for you to keep this unit
plugged in the kitchen when not in use, provided that
the main switch is turned off "0".
17