Asus RP-AC66 Kurzanleitung Seite 6

Q6: Why doesn't the 5GHz signal indicator of the Repeater light up?
• C heck whether your router supports 5GHz band. If your router is single band, the Repeater's 5GHz Signal Indicator will not light
up and it works at 2.4GHz band only.
Q7: I cannot access the web GUI to configure the RP-AC66 settings.
• Close all running web browsers and launch again.
• Follow the steps below to configure your computer settings based on its
operating system.
Windows 7
A. Disable the proxy server, if enabled.
1. Click Start > Internet Explorer to launch the web browser.
2. Click Tools > Internet options > Connections tab > LAN settings.
3. From the Local Area Network (LAN) Settings screen, untick Use a proxy server for your LAN.
4. Click OK when done.
B. Set the TCP/IP settings to automatically obtain an IP address.
1. Click Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
network connections.
2. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
3. Tick Obtain an IP address automatically.
4. Click OK when done.
6
U10858_RP-AC66_QSG.indb 6 2015-09-24 9:41:11