Assembly - human care NeXus 3 Benutzerhandbuch

Assembly

NEUTRAL
Ensure handle is in neutral position.
Set handle to desired height. Important:
Brake handle must be in neutral position!
Using the pointed end of the bolt, place it
in the hole in the push handle. At the same
time, tap the brake pad and slowly push
through the bolt.
www.humancaregroup.com
Slide upper tube into lower tube. Important:
Upper internal tube colour must match
colour of lower tube in frame!
Align hexagon shape of bolt in hexagon shape
in plastic cap. Important: The holes in the
upper and lower internal tubes will not line
up perfectly!
To install backstrap, ensure key shape faces
up. Place into clamp located at end of
handle. Tighten into place with screw and
nut.
ENG
7