e:cue Lighting Control Engine 2 Installationsanleitung Seite 22

Setup Manual - Lighting Control Engine 2
* Network Adapter *
2 Adapter
* Display Settings *
* Visible Devices *
* Device Manager *
51 Devices
28 Online
23 Offline
* Custom Menu *
* Programmer 6.1 *
DMX: 29fps Load:14%
GUI: 28fps Net: On
Supervisor Trig: On
Network adapter menu
Use the and
cursor key to return to the main menu.
* Intel(R) 8257.. *
192.168.178.25
255.255.255.0
00-0B-AB-46-78-A4
22
Press the
Press the
Press the
Device Manager overview.
Total number of devices in the Programmer.
Number of devices in online state.
Number of devices in offline state.
Press the
System Manual for details how to setup user
specific commands and actions. Use the
cursor keys to select, OK to execute.
The Programmer version.
DMX output frame speed/Programmer workload
GUI frame speed/Network enabled.
Supervisor mode enabled/Triggers enabled.
cursor keys to switch between the network adapters. Use the
The selected network interface.
IP address of the interface.
Netmask of the interface.
Hardware address of the interface (MAC).
cursor key to see network info.
cursor key to set display settings.
cursor key to see visible devices.
cursor key to enter. See the LAS
and