Scansonic BT350 Bedienungsanleitung Seite 5

Pairing Scansonic BT350 via NFC function with NFC
enabled devices
1. Turn on Scansonic BT350
2. Enable NFC and Bluetooth on your phone (NFC settings may
be found under your devices "More/Additional Settings")
3. Lightly swipe your phone down the NFC logo on side of
device, while making minimal contact. The indicator shall
turns solid ON that means successfully paired.
4. Compatibility: Most smartphones with NFC running Android
4.1 "Jellybean" and later.
Re-connecting to a paired device
If the speaker does not connect to the last used device
automatically, then you will need to select it manually from the
list of devices on your mobile device.
Pair Scansonic BT350 with a different device
First disconnect with existing device by either long pressing
the BLUETOOTH button or switching off Bluetooth connection
of existing device, and then pair with other device according to
steps 1-4 above.
BT350
5