Scansonic BT350 Bedienungsanleitung Seite 4

Pairing with Bluetooth enabled devices
(Mobile phones/Tablets etc.)
1. Keep the speaker and device within 1 meter of each other.
2. Hold down the power button for 2 seconds to turn the speaker
on, the LED indicator will blink quickly blue while the speaker
enters search mode.
3. Start the Bluetooth function on your mobile device and look
for "Scansonic BT350" in the Bluetooth device list (depending
on the Bluetooth version of your device you may have to
enter pass code "0000").
4. After successfully connecting, the LED will change to solid
blue.
Note:
• If the pairing was not successful, turn off the speaker and
re-pair again.
• After successful pairing, paired devices will remember
each other so there is no need to pair again unless pairing
information is deleted.
• To pair with a new device, just follow steps 1-4 above after
un-pairing the existing device.
4
BT350