Scansonic BT350 Bedienungsanleitung Seite 3

Charge Scansonic BT350
(14.8V rechargeable battery built-in)
1. Connect Scansonic BT350 to AC adaptor first, then plug AC
adaptor to socket.
2. Red LED turns ON during charging, turns OFF after fully
charged.
3. Unplug AC adaptor after fully charged.
Note: The Red LED will flash and makes a sound when the
battery power is low (<21%).
Starting Scansonic BT350 Bluetooth Speaker
1. After fully charged, long press the POWER button to turn on
the speaker.
2. Scansonic BT350 is in standby mode after power-on, blue
LED blinks quickly.
3. Scansonic BT350 turn off itself for power-saving purposes if
idle for 10 minutes.
4. To manually turn off Scansonic BT350 Bluetooth Speaker,
press the POWER button again.
BT350
3