Herunterladen Diese Seite drucken

WOLPERTECH 04015 Originalbetriebsanweisung Seite 13

Druckluft-klammergerät

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Check whether the trigger,
screws and nuts are fully
tightened before using the
appliance.
The appliance must not be
changed in any way without
prior approval.
The appliance must always
be disconnected from the air
inlet after being used and if
you are not using it any more.
Never aim the pointed side of
the appliance at yourself or
other persons. Hold the
appliance in a way the head
and body could not get
damaged if there is back
impact. Never start the
appliance when pointing to an
open space.
The switch fuse can only be
fixed to the working area,
however, never on materials
that are too hard to enable
clamps or nails to get
through.
Never use the appliance to
nail in an inclined position.
Never start the appliance at a
place where a clamp or nail
has already been fired!
Do not shift the fuse to the
working surface when you are
planning to fire.
Do not fire too near the edge
of the working surface.
Use the appliance only with the recommended pressure
(app. 6 bar).
Marking
Product safety:
Product corresponds to
appropriate EU standards
Prohibitions:
No pulling the cable
No touching inside
Cautions:
Warning/caution
Bystanders must keep safe
distance
Commands:
Please read the Operating
Instructions before using the
appliance
13
The magazine must not be
filled if the trigger or fuse is
pressed.
Do not use the appliance if
not airtight or when it needs
to be repaired.
When using the appliance,
the user must assume a
stable position.
Not to be used when raining
Risk of dragging in
Warning against thrown-off
items
Wear ear and eye
protection

Werbung

loading

Diese Anleitung auch für:

04021