WOLPERTECH 04015 Originalbetriebsanweisung Seite 11

Introduction
Thank you very much for the confidence in our Company
and our product. With the purchase of this product you
have decided to choose a high-quality appliance meeting
the current safety standards.
Please read carefully these Operating Instructions before
putting the appliance into operation. Put the appliance into
operation only after you have completely read and
understood these Operating Instructions. This manual
includes important instructions that are absolutely
necessary for safe and trouble-free operation of your
appliance. Therefore it should always be available near the
appliance for future reference.
Parts of nailers, pic. A, Art. No. 4021
1. Magazine
2. Trigger
3. Clamping lever
4. Extension
5. Stop lever
6. Switch fuse
Parts of tackers, pic. B, Art. No. 4015
1. Magazine
2. Trigger
3. Clamping lever
4. Extension
5. Switch fuse
Technical specifications, Art. No. 4021
Connecting thread:
Operating pressure:
Nail length:
Nail thickness:
Nail head diameter:
Max. clamp length:
Clamp back width:
Clamp thickness:
Recomm. inner hose diameter: 6 mm
Weight:
Case includes: tacker, 2 socket-screw keys, 500 clamps
with a length of 19, 32 and 40 mm, 1000 pins with a length
of 25 and 40 mm, 1 oil bottle, protective goggles.
Spare nails for Art. No. 4021
Length Ø of nail
head thickness
15 mm 2 mm 1.05 mm
25 mm 2 mm 1.05 mm
30 mm 2 mm 1.05 mm
40 mm 2 mm 1.05 mm
Spare staples for Art. No. 4021
Length Back width Clamp
thickness
13 mm 5.8 mm
22 mm 5.8 mm
32 mm 5.8 mm
40 mm 5.8 mm
Technical specifications of # 4015
Connecting thread:
Operating pressure:
Clamp length:
Clamp back width:
Clamp thickness:
Recomm. inner hose diameter: 6 mm
¼''
6 bar
40 mm
1.05 mm
2 mm
40 mm
5.8 mm
1 mm
3,6 kg
Nail Pcs Art. No.
5,000 4026
5,000 4027
5,000 4028
5,000 4029
Pcs Art. No.
1 mm 2,500 4022
1 mm 2,500 4023
1 mm 2,500 4024
1 mm 2,500 4025
¼''
6 bar
6-14 mm
12.8 mm
0.95 mm
Weight:
Case includes: tacker, protective goggles, oil bottle,
measure tape, 600 8 mm clamps, 600 10 mm clamps, 600
14 mm clamps.
Spare staples for Art. No. 4015
Length Back width
16 mm 5.8 mm
8 mm 5.8 mm
10 mm 5.8 mm
12 mm 5.8 mm
14 mm 5.8 mm
General safety instructions
Please read and keep all these instructions before putting
the appliance into operation.
Keep the safety instructions for future reference!
Safe work
Keep the place of your work clean!
A dirty working environment is the cause of injuries.
Consider the surrounding influences
Do not expose the appliance to rain. Do not use the
appliance in a wet or damp environment. Ensure
appropriate lighting. Do not use the appliance near
flammable liquids or gases.
Keep away from other persons!
Do not let other persons, especially children, touch the
appliance. Keep them away from the place of your work.
Store the appliance in a safe place!
If the appliance is not used, it should be stored in a dry,
locked room to prevent children from accessing it.
Do not overload the appliance!
It works better and safer in the specified power range.
Use the right appliance!
Do not use appliances with low power for challenging
works. Do not use the appliance for purposes for which it
has not been designed.
Wear appropriate working clothes!
Do not wear loose clothes and jewels as they could get
caught by the moving parts.
Anti-slip shoes are recommended to be worn when
working outside.
Wear a hairnet if you have long hair.
Use personal protective aids!
Protective gloves should always be worn.
Secure the workpiece!
Use a clamping device or a vice to hold the workpiece. It
will be held safer than just with your hand.
Avoid abnormal body posture!
Make sure your posture is safe and balanced at all times.
Treat your appliance with care!
Keep the appliance sharp and clean so that it can be
worked with better and safer.
Follow the maintenance regulations and tool replacement
instructions.
Check regularly the appliance cable and have it replaced
by an authorised professional if damaged.
11
1.8 kg
Clamp Pcs Art. No.
thickness
0.54 mm 5,000 4016
0.54 mm 5,000 4017
0.54 mm 5,000 4018
0.54 mm 5,000 4019
0.54 mm 5,000 4020