Honeywell DPS 200 Produktinformation Und Montageanleitung

Differential Pressure Switches DPS Series
FOR AIR CONDITIONING / VENTILATION, USER-ADJUSTABLE
APPLICATION
Differential pressure switches e.g. for monitoring filter, fan,
fire damper, or air flow status of air handling systems.
BENEFITS
 Switching-point easily adjustable with scale in Pascal;
 Direction of M20x1.5 conduit entry can be rotated in steps
of 120°;
 Only one screw needed for housing cover.
APPROVALS
 CE according to 2006/95/EC.
 Switch according to VDE 0630.
 EC Gas Appliance Directive 2009/142/EC according to
DIN EN 1854: 2010.
 ROHS 2011/65/EC.

(Eurasian Conformity)
CONTENTS OF DELIVERY
The delivery includes (in the case of individual packages) the
following parts:

1 DPS Differential Pressure Switch

1 Data Sheet with installation information

1 DPSA duct kit, consisting of:
2 m of silicone hosing
-
2 joining pipes with four screws
-
2 self-tapping screws for mounting the housing
-
3 terminal screws for electrical installation
-
Bulk packages available, upon request.
 U.S Registered Trademark
Copyright © 2015 Honeywell Inc.  All Rights Reserved
PRODUCT DATA AND INSTALLATION INSTRUCTIONS
TECHNICAL SPECIFICATIONS
Max. operating pressure 10 kPa
Pressure media
Pressure connections
Switching capacity
Electrical connections
Conduit entry
Protection class
Mounting lugs
Medium/ambient temp.
Storage temperature
Membrane material
OPERATING RANGES
adjustment
type range for upper
trip pressure*
DPS 200 20...200 (Pa)
DPS 400 40...400 (Pa)
DPS 500 50...500 (Pa)
DPS
200...1000 (Pa)
1000
DPS
500...2500 (Pa)
2500
*The trip pressure refers to vertical mounting. In case of
horizontal mounting (with the cover pointing upwards), the
range values increase by 20 Pa.
DIMENSIONS
See "Mounting/Einbau/Montage" on page 4.
ACCESSORIES / DELIVERY OPTION

DPST: Set of three screw terminals

DPSJ: Joining pipe (part of DPSA duct kit)

DPS...B in bulk pack (45 pc. per box), without
accessories, but with 1 set of Mounting Instructions
air, non-flammable gases, and
non-aggressive gases
two plastic tubes, outside
diameter: 6.0 mm
1.5 A, (0.4) /250 Vac
AMP connectors, 6.3 x 0.8,
DIN 46244 or screw terminals
M20x1.5
IP 54
integrated in bottom housing
(alternative: mounting angles)
-20...+85 °C
-40...+85 °C
silicone
switching tolerance at
difference adjusted
(hysteresis) switch-point
10 (Pa) ±20%
20 (Pa)
20 (Pa)
±15%
100 (Pa)
150 (Pa)
MU0B-0073GE51 R0415