Analog Operation, Operation - LGB 55055 Bedienungsanleitung

3. Replace the housing.
4. Plug the cable in for normal operation.
Operation
The red LED on the RC receiver lights up when the receiver
is ready for operation. Using the hand controller, select the
number for the track power circuit (see instructions for the
hand controller). The RC receiver assigned to that track
power circuit will transmit the data from the hand controller
to the 51070 locomotive controller connected to it. In analog
operation only speed, direction, and emergency stop can be
controlled.
Important! Do not select the same track power circuit at
the same time from two hand controllers. The radio remote
control will not work correctly.
Device ID No.
ID
1
2
3
4
5
6
7
Power Circuit
No.
0
1
2
3
4
5
6
7
ON DIP
1
0
1 2 3 4
1 0 0 0
0 1 0 0
1 1 0 0
0 0 1 0
1 0 1 0
0 1 1 0
1 1 1 0
0 0 0 1
1 0 0 1
0 1 0 1
1 1 0 1
0 0 1 1
1 0 1 1
0 1 1 1
1 1 1 1
9