Herunterladen Inhalt Inhalt Diese Seite drucken

Lanaform PULSE OXIMETER Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 42
Accuracy
Spo2
Valeur de l'alarme par défaut
Faible perfusion
Arrêt automatique
InSTRUCTIOnS FOR USE
low battery charge indicator
When the battery has reached its lowest level, the red battery charge indicator symbol appears above the
OLED screen.
Heart rate alarm
By default, the heart rate alarm triggers when the heart rate is greater than 110 BPM or less than 50 BPM.
A red indicator then flashes above the OLED screen. If the heart rate is between 50 BPM and 110 BPM, a
green indicator is displayed at the top of the screen.
±1% (90%-99%), ±2% (70%-89%), non spécifié (≤70%)
Limite Supérieure: 110BPM - Limite Inférieure: 50BPM
≤0.4%
8 sec.
Installing the battery
Insert two AAA batteries (not included) into the compartment making sure
you comply with the polarity before replacing the cover.
Instructions for use
1. Place your finger in the device, the fingernail uppermost, then release
the clips.
For optimum results, make sure your finger is centred on the finger guide
and hold the oximeter level with your heart or chest.
2. Press the On/Off button once.
3. Do not let your finger shake while the oximeter is operating. We
recommend that you do not move during operation.
4. The corresponding values are displayed on the display screen.
EN
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis