Care And Maintenance; Responsible Disposal; Specifications - CO/Tech LY9601H_UK Original Bedienungsanleitung

On/off and brightness setting
• Press [ ] to switch the work light on. The default light setting when the light is
switched on is 25% brightness.
• Pressing the power button repeatedly will change the light mode to 50%, 100%,
flash strobe light or OFF.
• The light can also be switched off by holding in [
or light mode.

Care and maintenance

• Switch the work light off before cleaning the exterior by wiping it with a clean,
damp cloth. Use only mild cleaning agents, never solvents or corrosive chemicals.
• If it is not to be used for a long time, the work light should be charged every 6 months
and stored in a dry, dust-free environment, out of children's reach.

Responsible disposal

This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.

Specifications

Charger
Battery
Light source
Luminous flux
Colour temperature
Colour rendition
Charging time
Rated operating time 2.5 hours at full brightness
IP rating
Size
Weight
Input 100–240 V AC 50/60 Hz
Output 12 V DC, 0.5 A
Lithium-ion 7.4 V/2.2 Ah
(Charging voltage 12–14 V DC)
COB LED
Max. 650 lm
4000 K
> 80 Ra
4–5 hours
IP54 (charger IP20)
265 × 145 × 162 mm
1 kg
5
] regardless of the brightness