TACKLIFE ACP1C Bedienungsanleitung Seite 5

Operating Instructions
1. Make sure the vehicle engine is running .
2. Remove the dust cap from the tire value ,and then attached the air chuck to the tire valve stem,
and screw onto tire's valve stem
Plug the power cord into a 12V cigarette lighter socket.
3.
Press （set）button to choose the display unit. ( 3 units available: PSI,KPA,BAR)
4.
Press (-)or (+) button to set the desired pressure ,and then wait until it stops flashing or press
(set) button to stop flashing.
5. Press ( ) button to turn on the power switch. The compressor will automatically stop inflating
●
once the desired pressure is reached.
6. Unscrew the valve connector , place the tire valve dust cap back to the tire &disconnect the
power cord from a 12V cigarette lighter socket.
Note: To avoid over-inflation of tires, please check the recommended car tire pressure in the
vehicle's owner's manual. For bicycle tires, please check the tire marking.
Features
1. CONVENIENCE: Plug directly into cigarette lighter socket.12V
2. MULTUPLE USES: Inflate tires on cars ,bikes, truck and SUV. Adaptors for balls and inflatables
included for sport
3. EASY TO READ: 3 display units: PSI,KPA,BAR
4. LED LIGHT
5. PREVENT OVER INFLATION : Auto shut off when reaching the desired tire pressure.
Instructions on environment protection
Do not dispose of this product in the usual household garbage at the end of its life
cycle; hand it over at a collection point for the recycling of electrical and electronic
appliances. The symbol on the product, the instructions for use or the packing will
inform about the methods for disposal.
The materials are recyclable as mentioned in its marking. By recycling, material recycling or other
forms of re-utilization of old appliances, you are making an important contribution to protect our
environment.
- 03 -