Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
READ CAREFUULY
Unless directions are followed, physical injury or property damage result. When using the
compressor, never leave it unattended
1. Power required:12 Volts DC(10-15amps), to avoid damage to the compressor and for the charger.
2. This compressor is designed for occasional use only. Operation over an extended period of the
time will overheat the unit and damage the compressor .
3. If the compressor is making an abnormal sound or metal fittings get too warm to the touch
should indicate to you that the unit has been operating too long and is overheating ,Turn off
and let it cool , approximately 30 minutes before resuming operation .
4. Do not use the compressor while the vehicle is moving .
5. Do not expose the unit to moisture.
6. Do not put the compressor in or around flammable environments.
7. Do not kink or block the air hose while the compressor is working .
8. Do not use compressor on high pressure tires such as those used on large trucks.
9. Keep it away from children
DO NOT OVER INFLATE ITEMS. Please consult your owner's manual for a more exact pressure
rating. Over inflating may cause serious injury and burst.

TROUBLESHOOTING

COMPRESSOR DOES NOT START/BLOWS FUSES
1. Make sure the power plug connect into the receptacle correctly.
2. Clean receptacle and plug terminals if there is any dirt.
3. Check vehicle lighter fuse. Should be 10 Amps or higher .(Suggest 15 Amps).the correct
method of use is vertical insert and pull out, don't shaking out, often cause shaking loose
vehicle lighter fuse and short circuit, easy to fire insurance and external equipment.
4. Don't plug directly into the multiple interface receptacle , and must be used in vehicle starting
condition, otherwise the battery power will soon be exhausted.
5. Make sure the equipment after use or vehicle flameout pull out in time, otherwise when the
vehicle starts, under the impact of the large current easy burning equipment.
COMPRESSOR RUNS BUT DOES NOT INFLATE
1. Make sure the connector always touches the core of the valve stem
2. Check hose for breaks and leaks at fittings.
COMPRESSOR RUNS SLOWLY
1. Overhead from excessive use .Shut if off and let it cool for 30 minutes.
2. Voltage too low , Check condition of your vehicle battery.
- 02 -

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für TACKLIFE ACP1C

Inhaltsverzeichnis