Inhaltsverzeichnis
Werbung
Technical details
Mowing width:
0,86 m
Wheel base:
0,55 m
Length:
1,5 m
Handlebars height: 0.85 m - 1,0 m
Speed:
2,8 km/h
Weight:
87 kg
Tyre size:
4.00-4 pneumatic,
rough terrain tread
Design:
robust sheet steel construction
Safety:
dead man's switch
Engine
stroke volume
B&S 3,5 HP
Honda GX120
Kawasaki FA 130D
IMPORTANT!
The power rating of the engine indicated in this document is the net power output tested on a production
engine for the engine model and measured in accordance with SAE J1349 at a specified rpm. Mass
production engines may vary from this value. Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including the operating speed of the engine in
application, environmental conditions, maintenance, and other variables.
Hand and arm vibration on cutterbar mower
according to VDI2057, page 2
1. Method of measurements
The measuring was carried out in mowing operation on sandy ground at a grass height of 20cm.
The vibrations were measured on the handlebars in 3 axis: x, - y, - z axis, see DIN 34675, part 8.
The effective value is measured over 60 seconds.
2. The measuring equipment used complies to DIN 45675
3. Operating conditions of the cutterbar mower
Warm, run-in engine under full load.
Beam width:
standard
Beam height:
approx. 4-5cm
Fuel tank:
approx. 50% full
Beam:
at middle setting
4. Measurement result: 60s effective value = 21,8m/s
Noise level for the cutterbar mower
According to EG directive 84/538/EWG
1. Method of measurements
The measurement was carried out in standstill operation on sandy meadow.
Motor
B&S 3,5HP
Honda GX120
Kawasaki FA130D
2. Used measurements according to DIN 45634
3. Operating conditions of the cutterbar mower:
Warm, run-in engine under 100% of full load
Beam width:
standard
Beam height:
approx 4 - 5 cm
Fuel tank:
approx 50 % full
output max.
148 ccm
2,6 KW/3600 rpm
118 ccm
2,6 KW/3600 rpm
129 ccm
2,2 KW/4000 rpm
2
Sound gage
80 dBA
78 dBA
83 dBA
62
effective output
2,1 KW/3000 rpm
2,6KW/3600 rpm
2,1 KW/3600 rpm
Sound proficiency
102 dBA
100 dBA
103 dBA
Werbung
Inhaltsverzeichnis
