Using The Alarm - RADIO.CUBO TS522D+ Bedienungsanleitung

RESET
Allows you to clear all settings and restore the factory confi guration. Select the option YES and
press the ENTER button on the remote control or the MENU/SELECT knob on the main unit to
start the reset to factory settings or NO to cancel the operation.
CAUTION: all the date, clock, alarm, equalizer presets, and radio stations settings will be lost.
FIRMWARE VERSION
Allows to view the fi rmware version installed in the unit.

USING THE ALARM

Setting the alarm
1
1. Turn the radio on, press or on the remote control to select alarm 1 or alarm 2.
1
The icon or the icon will fl ash on the display.
Press ENTER to enter the Alarm menu, press
SELECT knob on the main unit to adjust the desired time for the alarm. Press ENTER or the
MENU/SELECT knob to confi rm your choice
BACK to return to the previous menu item.
After setting of the alarm time, you can select the alarm source (DAB/FM/Buzzer). By setting
DAB or FM you can set a radio station stored in the preset, to be associated to the alarm or the
last radio station listened to.
The next option is the repetition frequency of the alarm that may have the following options:
Once – Daily – Weekdays – Weekends. When selecting the option Once you need to confi rm
the date of the alarm before moving on to the next step. Set the playback volume of the alarm.
When the alarm is set to ON and saved, the icon for alarm 1 and/or 2 will be shown on the
display to indicate the active status.
on the remote or turn the MENU/
1
and move to the next function , or press
40
ENABLING OR DISABLING THE ALARM
1
In standby mode, press or on the remote control to enable or disable the alarm, or turn
1
on the radio, press or to select alarm 1 or 2, on the remote control press the buttons
to select ON/OFF and confi rm with ENTER.
The icons are shown on the display to confi rm that the alarm has been activated.
SNOOZE OPTION AND ALARM SLEEP MODE
While the alarm is enabled, press SNOOZE on the remote control to repeat the alarm after a
certain interval (according to the settings entered in the relevant menu - the default value is 5
minutes) or by pressing the VOL/STANDBY knob on the main unit.
When the SNOOZE mode is active, the display shows the
of operation.
To stop the alarm, press any button on the remote control except for SNOOZE, or any knob on
the main unit except for VOL/STANDBY.
Zz Zz
icon that identifi es its active status
41