Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Insert the adaptor into the socket located on the back of the winder and plug it into the electrical
outlet.
2. Open the cover, then carefully pull out the watch holder.
3. Place the watch around the holder by pushing the spring in the back oft he holder and place your
watch around the holder then let go oft he spring.
4. Once the watch is around the holder place the holder back into the winder. Push until you hear a
click signifying that it is securely in the winder.
5. Turn the switch „ON".
Press „-„ the winder will turn clockwise.
The center postion turn the unit off .
Press „=" the winder will turn counterclockwise. adapter socket
•
If you do not use this product for a long time, please take off the adapter.
•
Always tur off the power when inserting or removing watches.
According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
How to use the winder
Attention
Hints on Disposal
Declaration of Conformity
6
Werbung
