Important Safeguards - iCES IFS-400 Benutzerhandbuch

IMPORTANT SAFEGUARDS

When using electrical appliance, basic safety precautions should always be followed,
including the following:
1. Read all instruction before using slicer.
2. Close supervision is necessary when any appliance is used near children.
3. Switch off appliance first, unplug from outlet when not used, before putting on or taking
off parts, and before cleaning; Switch off appliance before approaching parts which
move in use.
4. Avoid contacting moving parts. Never feed food by hand. Always use completely
assembled slicer with sliding feed table and piece holder. The appliance must be used
with the sliding feed table and the piece holder in position unless this is not possible
duo to size or shape of the food.
5. To protect against any risk of electrical shock, do not put power unit in water or other
liquid.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the place
of purchase for a replacement or repair free of charge.
7. The use of attachments not recommended or sold by the appliance manufacturer may
cause fire, electric shock or injury.
8. Do not use the appliance outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surface.
10. Blade is sharp. Hold only by blade lock. Handle carefully when cleaning.
11. Do not use the appliance for other than its intended use.
PREPARING TO SLICE
1. Unwrap cord from bottom of slicer, and slide into slot. Position slicer on a clean, dry
and smooth surface .
2. Move the sliding feed table back and forth a few times to make sure movement.
3. Place the piece holder on back of the sliding feed table.
4. Select the required slice thickness by turning thickness adjusting knob, clockwise for
thinner slice and counter-clockwise for thicker slice. The range of thickness adjusting
is from 0 to 15mm.
Thickness Adjusting Knob
(fig.2)
2