start-up procedure
requirements for the place of use
en
46
For safe and trouble-free operation of the appliance, the
installation location has to satisfy the following requirements:
Place the appliance on a dry, flat, horizontal, waterproof and
■
heat-resistant surface.
The surface finishes on furniture may contain constituents
■
that can be detrimental to the rubber feet of the appliance.. If
necessary, place a mat under the feet of the appliance.
Do not place the appliance in a hot, wet or very humid
■
environment or in the vicinity of inflammable materials.
Because of hot surfaces, the appliance must be placed at a
■
location which is out of the reach of children.
The mains socket must be easily accessible to enable quick
■
disconnection of the appliance from the electric circuit in the
event of an emergency.
BEEM - Elements of Lifestyle