Operation - Bartscher 700965 Original-Gebrauchsanleitung

•
You must not drill any openings or fix other objects onto the device.
•
Do not place any heavy objects on the device.
•
Position the device so that the power plug is available to immediately unplug the
device from the mains, if needed.
Power supply
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
•
Before connecting the device to the power supply for the first time and starting its
operation leave the device for at least 2 hours to let the cooling equilibrate to avoid
failures.
•
In the event of power supply cut or unplugging, do not plug in the device for at
least 5 minutes.
•
The electric socket should be provided with 16A circuit breaker. Only plug in directly
to the wall socket. You must not use any adapter or extension block.

5.2 Operation

Preparation
•
Before using, thoroughly clean the device and included elements according to the
instructions in point 6 "Cleaning and care".
•
Hang the baskets in a desired place inside the device, if needed. Close the lid of
the device.
•
Plug in the device to the socket fixed according to the legal requirements.
- 32 -