Inhaltsverzeichnis
Werbung
Setting up Aura Terminal outside the chassis
1. Connect the bundled extension cable and addressable RGB strip by following steps 1 and 2 in
the Internal case lighting setup section.
2. C onnect the DC power connector of the bundled adapter into your ROG Aura
Terminal's power (DC) input.
3. Plug the AC power adapter into a 100V~240V power source.
4. Connect the bundled Micro USB to Type-A cable to the micro USB port on your ROG Aura
Terminal and a USB port on your PC.
8
Q13951_ROG_AURA_TERMINAL_QSG.indb 8
The power adapter may vary in appearance, depending on the model and your region.
This step can be skipped if you wish to use the built-in lighting effects
Quick Start Guide
5/22/2018 3:44:09 PM
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
