Getting Started - Asus ROG AURA TERMINAL Schnellstartanleitung

Getting Started

The ROG Aura Terminal may be set up in the following two methods:
• Setting up inside the chassis
• Setting up outside the chassis
Setting up inside the chassis
1. Connect the bundled extension cable to the addressable RGB header on the ROG Aura
Terminal.
2. Connect an addressable RGB strip to the extension cable.
6
Q13951_ROG_AURA_TERMINAL_QSG.indb 6
• Ensure that the extension cable is installed in the correct orientation, failure to
do so may cause severe damage to the addressable RGB strip or addressable RGB
device.
• Before you install or remove the ROG Aura Terminal and/or addressable devices,
ensure that the ATX power supply is switched off or the power cord is detached
from the power supply. Failure to do so may cause severe damage to the ROG Aura
Terminal and/or addressable devices.
• The addressable RGB device you wish to install may not require the bundled
extension cable. Please check the product's packaging for more details on
installation.
Quick Start Guide
5/22/2018 3:44:09 PM