Temperatur T1 Und T2 (Temperature T1/T2) - H-tronic TS 2125 Anleitung

The parameter have the following meanings:

Temperatur T1 und T2 (Temperature T1/T2)

Here you can see the measured temperatures at the temperature sensors T1
and T2.
dT (T1 – T2)
Here you can see the temperature difference between sensor T1 and T2.
T1 min./max.
Here you can see the minimum and maximum temperature measured at sensor
T1.
T2 min./max.
Here you can see the minimum and maximum temperature measured at sensor
T2.
T1 alarm Timer
Here you can see the value of the alarm delay on channel T1.
T2 alarm Timer
Here you can see the value of the alarm delay on channel T2.
All other values are identical as in the other modes.
mOde "zIrkO-kOnTrOll" (cIrculaTIOn pump cOnTrOl)
In this mode the device can be configured as an energy saving controller for a
circulation pump in hot water and heating systems. To do this the temperature
sensors are mounted onto the inflow and outflow pipes. The measured
temperature difference between inflow and outflow can be used to control a
circulation pump.
TS 2125 51