Display Errors Table - Indel Webasto DR16 Installations- Und Wartungsanleitung

coincides with the temperature read on the digital thermometer. If it does not
coincide, change the Offset related to the temperature you wish to reach inside
the compartment until the temperature read on the display coincides with the
temperature indicated on the digital thermometer.
Offset
1
2
3

2.1.6 Display Errors Table

Error
E1
E2
E3
E4
E5
E6
44
Cause
Insufficient voltage (Volts below the cut-in / cut-out value)
Defective fan
Control unit error or compressor blocked
The refrigeration system is too loaded with gas and/or the com-
pressor is running at a number of revolutions that is too low
Room temperature is too high
Internal temperature sensor error
Temperature Interval
T ≥ -6°C
-12°C ≤ T ≤ -7°C
T ≤ -13°C
User Manual