Werbung
Verfügbare Sprachen
Verfügbare Sprachen
hear a "click" sound, which is the sound of snapping shut.
-
Pull the middle strap located in the front part of the carseat in order to
make sure the child is tightly held by the braces of the car seat (seatbelt
system)
2.
Adjusting the braces (pict. D)
The lenght of the braces (seatbelt system) should be adjusted to your child´s
individual needs. The braces should be put through the slots located nearest from
your child´s shoulders.
Adjusting the braces is as follows (pict. E)
a)
Belt-loosening
Press the regulative button located in the front side of the shell. At the same time
pull the braces.
b)
Belt-tightening
Tighten the middle belt in front of the shell until the braces cling tight to the child´s
body.
3.
A pad with shaping insertion
The Berber Carlo children´s car seat is equipped with removable filling pad for
infants.
It tailors the laying position to an individual child´s needs and holds the infant´s
head
The filling pad may be used longer, after removing the sponge filling. Shaping
insertion should be removed by unfolding the side elements of gauze, and then
sliding the side elements inside. We suggest to use the filling insertion until the 5
month of child´s life.
II.
Installation of the Berber Carlo children´s car seat in a car.
While installing the children´s car seat in the car you have to be careful with the
following actions:
-
NEVER install the Berber Carlo children´s car seat on the seats equipped
with the airbags. Such an installation may cause serious injures or even
death.
-
ALWAYS install the Berber Carlo children´s car seat backwards to the
direction of travelling, while the holder of the carseat should be set in
th
13
Werbung
