Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dear Parents,
we would like to congratulate you on buying the Berber Carlo children´s car seat.
The Berber Carlo children´s car seat is in accordance with the strictest standards
of ECE R44/04 and is appropriate for children of weight from 0 to 11 kg.
The Berber Carlo children´s car seat assures maximum safety only when it is
used in compliance with its service manual.
IMPORTANT!
-
The Berber Carlo children´s car seat may ensure optimal safety only
when used in complience with the regulations.
-
The Berber Carlo children´s car seat may be used on the front or back
seat, but only when it is put backwards to the direction of travelling.
-
DO NOT use the Berber Carlo children´s car seat on a passenger´s seat
if it is equipped with an airbag. Such an installation may cause serious
injures or even death.
-
When using the Berber Carlo children´s car seat, the bacl passenger´s
seat, if foldable, must stay immobiled.
-
The Berber Carlo children´s car seat should ALWAYS be fastened with
seatbelts, even when it is empty.
-
We firmly advise against using our product purchased from a third party.
Ich such case you will never be sure if such children´s car seat didn´t take
part in a car accident or whether it was damaged in any other way.
-
You must make certain that there are no objects laying loosley on the
backs eat, which could injure the child.
-
A children´s car seat which took part in a car accident may not ensure
safety to your child, due to directly invisible damages, that is why we
firmly advise to replace it.
I.
Placing a child in the Berber Carlo children´s car seat (pict. A-F)
1.
NEVER leave the child unattended in the car seat, also while using the
car seat outside the car.
-
By pressing the red button unfasten the buckle of a car seat´s belt
-
Place the child in the Berber Carlo children´s car seat, fasten the child´s
safety belt and regulate its stress.
-
Make sure that the child is properly placed in the Berber Carlo children´s
car seat and that the child´s back clings tight to the backrest.
-
The braces must cling tight and flat to the child´s shoulder
-
Plastic endings of the braces must be joined together (pict. A)
-
Next, put the joined plastic endings of the braces into the buckle, until you
12
Werbung
