D-Link DCS-5605 Installations Anleitung Seite 5

Configuration with Wizard
4. Configuration with Wizard
Insert the DCS-5605/5635 CD into your computer's CD-ROM drive to begin the
installation. If the Autorun function on your computer is disabled, or if the D-Link
Launcher fails to start automatically, click Start > Run. Type D:\DCS5605_5635.exe,
where D: represents the drive letter of your CD-ROM drive.
Click Installation Wizard to begin the installation.
Install the Setup Wizard SE and execute the program.
The Setup Wizard will appear and display the MAC
address and IP address of your camera(s). If you have
a DHCP server on your network, a valid IP Address
will be displayed. If your network does not use a
DHCP server, the network camera's default static IP
192.168.0.20 will be displayed.
Click the Wizard button to continue.
Enter the Admin ID and password. When logging in for
the first time, the default Admin ID is admin with the
password left blank.
Click Next, to proceed to the next page.
Select DHCP if your camera obtains an IP address
automatically when it boots up. Select static IP if the
camera will use the same IP address each time it is
started.
Click Next, to proceed to the next page.
Take a moment to confirm your settings and click Restart
to save all and reboot the camera.
5
D-Link DCS-5605/5635 Quick Installation Guide