Herunterladen Inhalt Inhalt Diese Seite drucken

Cassette Recorder; Cassette Playback - Philips AZ 1565 Bedienungsanleitung

Cd radio cassette recorder
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34
CD PLAYER
• To take a CD out of its box, press the centre spindle while
lifting the CD. Always pick up the CD by the edge and return
the CD to its box after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the centre
towards the edge using a soft, lint-free cloth. Do not use
cleaning agents as they may damage the disc.
• Never write on a CD or attach any stickers to it.

Cassette playback

1. Select TAPE source.
™ The display shows
TAPE
2. Press OPEN•STOP / 9 to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY 1 to start playback.
5. To interrupt playback press PAUSE ;. To resume, press this
key again.
6. By pressing SEARCH 5 or 6 on the set fast winding of the
tape is possible in both directions.
7. To stop the tape, press OPEN•STOP / 9.
• The keys are automatically released at the end of the tape,
except if PAUSE ; has been activated.
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• This deck is not suited for recording on CHROME (IEC
METAL (IEC IV) type cassettes. For recording, use only
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.
• The best recording level is set automatically. Altering the
VOLUME, INCREDIBLE SURROUND, DIGITAL EQUALIZER or
DBB controls will not affect the recording in progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab.
Recording on this side is no longer possible. To record over
this side again, cover the tabs with a piece of adhesive tape.
Synchro Start CD recording
1. Select CD source.
2. Insert a CD and if desired, programme track numbers.
3. Press OPEN•STOP / 9 to open the cassette holder.
4. Insert a suitable tape into the cassette deck and close the
cassette door.
throughout tape operation.
AZ 1565/00

CASSETTE RECORDER

II) or
11
page
11

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis