Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the cables
Depending on your printer configuration, the connector
panel may vary from the illustration.
Self test printout
1) Turn off the printer.
2) Push the Paper Feed Button while turning on the
printer.
3) Press the Paper Feed Button two times shortly to
select the self test. Press same button for more than
one second to start printout.
Safety instructions
Do not touch the printer's cutter and tear
bar.
The print head is a thermal element and it
is at high temperature during printing or
just after operation. Therefore, do not
touch it and its peripherals for safety
reasons.
The thermal head is an ESD-sensitive
device. To prevent damage, do not touch
either its printing part or connecting parts.
Caution:
•
Install the printer on a flat and stable place.
•
Display Port: Only connect BA6x Customer
Displays. Cash Drawer Port: Only connect cash
drawers with a fire enclosure.
•
Keep the printer away from water source.
•
Do not use or store the printer in a place exposed
to heat or fire, moisture, serious pollution and
direct sunlight.
•
Do not place the printer on a place exposed to
vibration or impact.
•
No dew condensation is allowed to the printer. In
case of such condensation, do not turn on the
power until condensation completely
disappeared.
•
Only use power supply units and cables released
by Wincor Nixdorf.
•
Connect the printer to "UL Listed Computers"
only.
•
Only connect cables to the 24V connector which
are marked with DP-1 or DP-2.
•
The printer should only be disassembled or
repaired by a technician who is certified by the
manufacturer.
Further Information
Please find detailed information about the printer in the
Operator's Guide. That document as PDF file and needed
drivers can be downloaded from this web site:
http://www.wincor-
nixdorf.com/internet/site_EN/EN/Support/
Downloads/POSLotterySystems/poslottery
systems_node.html
Copyright© Wincor Nixdorf International GmbH, 2016
The reproduction, transmission or use of this document or its
contents is not permitted without express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration
of a utility model or design, are reserved.
Delivery subject to availability; technical modifications possible.
Order No. 01750113710D
Werbung
