Mounting The Wall Bracket - Coline CH937-UK Bedienungsanleitung

Mounting the wall bracket

This handheld vacuum cleaner comes with a specially designed wall bracket that both
holds and charges your vacuum cleaner.
1. Mount the wall bracket by first holding it up against the wall where you wish to
mount it and marking the position of the holes for screws (see fig.) with a pencil
or sharp object.
2. Drill the mounting holes and insert a wall plug into each hole.
3. Screw a screw into the lower hole, leaving a little protruding.
4. Hang the bracket on the lower screw.
5. Screw the upper screw through the bracket and into the wall. Tighten both screws.
5