Community Playthings Outlast Verwendungsrichtlinien

Outlast water table set
Outlast water table
Recommended Use
The Outlast water tables support outdoor sand and
water play and provide built-in storage. Pans neatly
contain wet materials but can also be used with sand
or natural loose parts. Tough waterproof lids tidily
cover pans when not in use. The wide, smooth space
around the pan creates a work surface. The shelf
provides a convenient space for storage. The table is
stable and durable, allowing it to be used almost any-
where outdoors, e.g. garden, sand pit, messy areas.
WARNING
c This product is intended for use by children of immature
judgment, therefore supervision is required at all times.
c Water is a drowning hazard. Do not leave pan of water
unattended.
CAUTION
c Adults are responsible to prevent Outlast water tables
from being employed by children in unsafe combinations
with other components.
Assembly
Your Outlast water table comes fully assembled.
The Water table set also includes crate(s) and a Flow pan.
Accessories
Tables are available in two heights, 46cm and 61cm.
Outlast Flow pan adds an extra level and water flow pos-
sibilities.
Crates provide convenient storage and come in two sizes.
The Outlast deep crate fits in the 61cm table only. The Out-
last shallow crate will fit on any table shelf.
IMPORTANT
instructions for future reference.
© 2017 by Community Products (UK) Ltd
JS89 Eu 0490 Revision 00
Retain these
Construction
The wooden components are manufactured from long lasting
acetylated wood and finished with a nontoxic stain. All edges
and corners are rounded for safety and ease of cleaning.
Stainless steel hardware is used throughout and plastic com-
ponents are UV resistant and engineered to ensure long life in
outdoor environments.
Maintenance
The tables can be left outside all year around. Acetylated
wood weathers to a natural silver-grey if left untreated. Over
time outdoor surfaces may darken with mildew. To remove,
scrub with a cleansing agent. When dry, apply a nontoxic,
penetrating stain, then apply a nontoxic mildewcide to mini-
mise mildew growth.
Periodically inspect for splinters, broken or loose parts, and/
or malfunctions. Remove from service when any condition
develops that might make operation unsafe.
Cleaning
Mud and dirt can be removed with scrub brush and water.
User Modifications
We cannot be responsible for modifications made by custom-
ers to our products in the field without our supervision, test-
ing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Service with a
description of the part(s) needed and the ID Code from the
product.
Use only replacement parts supplied by Community
Playthings.
Brightling Road, Robertsbridge, TN32 5DR UK
www.communityplaythings.co.uk; sales@communityplaythings.co.uk
Community Playthings
Phone: 0800 387 457