Community Playthings Outlast Series Anleitung

Outlast tables and seating
Recommended Use
The Outlast tables and seating support many outdoor
activities including eating, art projects, manipulative
and dramatic play. They are available in Low, Medium,
High and School heights, and can be used almost any-
where outdoors as a combined set or individually.
The smooth wooden table top provides a stable, gap-
free work surface. The wide stance of the legs ensure
stability and maximises leg room.
Seats and benches are wide and stable. Handles in
the centre of their tops enable easy hauling. Detached
from the tables, they promote open ended play and
unlimited arrangements: at a picnic table, circled up
for group gatherings, as balance beams, or for large
muscle play.
WARNING
c This product is intended for use by children of immature
judgment, therefore supervision is required at all times.
c Benches and seats are not designed to stack or nest.
CAUTION
c Benches and seats are heavy. Encourage cooperation to
prevent injury.
c Adults are responsible to prevent tables, seats and
benches from being used by children in unsafe combina-
tions with other components.
c To prevent injury, caregivers and staff must familiarize
themselves with these materials before giving children
access to them.
Accessories
Four lengths of table legs are available; for a table height of
40 cm, 45 cm, 50 cm or 55 cm.
Assembly
Benches and seats come fully assembled. They come in four
heights, 20 cm, 25 cm, 30 cm and 35 cm. Sets consist of four
cartons: a table top, table legs and two benches or seats.
The tables comes in two cartons, one containing the table
top, and the other containing:
• Four legs
• Four barrel bolts
• Four machine screws
• Two hex keys
If your shipment is incomplete, please call Customer
Service.
IMPORTANT
instructions for future reference.
© 2016 by Community Products (UK) Ltd
JV42 Eu 0479 Revision 01
Retain these
Legs attach to plastic brackets.
1. Turn table upside down.
2. Slide legs all the way into
brackets.
3. Insert bolts through aligned
holes.
4. Tighten screws with hex
keys provided.
CAUTION
c Assembly to be carried out
by a competent adult only.During assembly children
should be kept away from the product due to possible
risk of injury.
Construction
The wooden components are manufactured from long lasting
acetylated wood and finished with a nontoxic stain. All edges
and corners are rounded for safety and ease of cleaning.
Stainless steel hardware is used throughout and all end grain
is protected by UV resistant plastic guards formulated to
ensure long life in outdoor environments.
Maintenance
The tables and seating can be left outside all year around.
Acetylated wood weathers to a natural silver-grey if left
untreated. Over time outdoor surfaces may darken with
mildew. To remove, scrub with a cleansing agent. When dry,
apply a nontoxic, penetrating stain, then apply a nontoxic
mildewcide to minimise mildew growth.
If you wish to maintain the original finished look of the
tabletop while using paint, protect the work surface with
an appropriate cover. Scrubbing to remove paint stains may
also remove some factory stain. However, this will not affect
weatherproofing.
Periodically inspect for splinters, broken or loose parts, and/
or malfunctions. Remove from service when any condition
develops that might make operation unsafe.
Cleaning
Mud and dirt can be removed with scrub brush and water.
User Modifications
We cannot be responsible for modifications made by custom-
ers to our products in the field without our supervision, test-
ing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Service with a
description of the part(s) needed and the ID Code from the
product.
Use only replacement parts supplied by Community
Playthings.
Brightling Road, Robertsbridge, TN32 5DR UK
www.communityplaythings.co.uk; sales@communityplaythings.co.uk
Community Playthings
Phone: 0800 387 457