Certificate Of Conformity; Description; Patent Pending; Visual Inspection - Simarghu FIRE Bedienungsanleitung

UK

12. CERTIFICATE OF CONFORMITY

ARBORIST HARNESS
MODEL NO.:

DESCRIPTION:

DATE OF MANUFACTURE:
SERIAL NO.:
QUANTITY:
MANUFACTURE
–– This product has been
manufactured to the regimented and documented
procedures within a quality environment that ensures
that all material is traceable back to specification and
source. Specification and inspection is documented
under...
REF:

PATENT PENDING

16

VISUAL INSPECTION

–– 100% Each and every
product covered by this certificate has been visually
inspected during manufacture and on packing. The
following points were addressed and checked against
the approved build standard:
Correct webbing used (Black/Red – Female
and Black/Grey – Male)
All webbing checked for damage/wear or
cuts
All structural stitching checked
completeness loose threads
Adjustment buckles function correctly and
checked for any damage
All attachment points present and
examined for damage
All engraving examined on hardware
ensuring quality and correctness
Labelling inspected for both clarity,
correctness and position
Goods inspected to both working sample
and approved specification
All comfort parts examined (back pad, leg
pads) keepers and accessory loops
Stowage bag checked
HARDWARE STATIC TESTING
–– 1 off part per
batch was tested to ensure the product functioned as
per specification. The part was attached to a test rig,
and then load was applied and recorded by a digital
load cell:
Multi ring held for 3 min with a load of 15kN
34mm/40mm ring held for 3 min with a load
of 30kN
Parts were checked for damage, all observations and
results were recorded.
BATCH NUMBER(S):
DECLARATION
–– All test equipment is maintained
in a calibrated condition and inspected periodically
to assure conformance with national standards. All
inspection and test was performed by trained and
competent personnel and the product was found to
conform to European Standard BS EN 358: 2002 and
EN 813:1997.

SIMARGHU

, PO BOX 412, Carlisle, CA1 9GR
®
T: +44 (0)1228 371 583 E: info@simarghu.com
www.simarghu.com
SIGNED:
INSPECTOR:
DATE: