Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note – Bluetooth
Some terminal devices require a
password in order to connect to another
Bluetooth
device.
®
• If your terminal device requests a
password to establish the connection,
enter 0000, 1234, 1111 or 8888.
Note
If pairing was successful, the status LED
(3) lights up in blue.
• You can now use the adapter.
5.3. Bluetooth
pairing in transmitter (TX)
®
mode
Note – Pairing
• Make sure that your Bluetooth®-
capable terminal device is on and
Bluetooth® is activated.
• For more information, please refer
to the operating instructions of your
terminal device.
• Connect your terminal device to the adapt-
er using the included 3.5 mm jack cable
and the audio connection (AUX) (4).
• Select the adapter's TX mode by moving
the switch (1) to the left.
• Turn on Bluetooth
on your Bluetooth
®
headphones/speaker.
• For more information, please refer to the
operating instructions of your terminal
device.
• The adapter and the Bluetooth
speaker should be no further than 1 metre
password
®
®
headphones/
®
apart. The shorter the distance, the better.
• With the adapter on, press the multifunc-
tion button (2) twice. After approximately
3 seconds, the status LED (3) will emit
flashes of blue light to indicate the device
is in pairing mode.
• The connection is now established auto-
matically.
5.4. Automatic Bluetooth
(after successful pairing)
Note – Pairing
• Make sure that your Bluetooth®-
capable terminal device is on and
Bluetooth® is activated.
• For more information, please refer
to the operating instructions of your
terminal device.
• Make sure that the adapter is on.
• After the devices have been paired once, the
connection is then established automatically.
• You can now use the adapter.
Note
• If pairing was successful, the status
LED (3) will be lit blue.
• It may be necessary to make settings
on your terminal device to enable auto-
matic connection to the paired adapter.
connection
®
Werbung
