Output - CreamWare MINIMAX Klangbox Benutzerhandbuch

Sustain
Sustain is the third segment of the envelope curve and
describes the volume, on which the envelope curve
remains after Decay.
Release
Release is the fourth element in influencing the envelope curve. It is
only active, if the Decay push button is switched to "On" position.
The Release-Phase can not be adjusted by a dedicated button or
knob. Within the Release-Phase the envelope falls down to its mini-
mum and the sound disappears. The duration of this process can
be adjusted with the Decay knob.

OUTPUT

Velocity
The keyboard's velocity modulates every level of the en-
velope. The Envelope varies increasingly or decreasingly
in modulation depending on how intense or less intense
the keyboard is played. The upper knob controls the
Amplifier's Envelope and the lower knob, the Filter Enve-
lop.
Volume
With the Volume setting you define the volume of the
complete instrument. Please turn down the volume, if
distortion in polyphonic sounds should occur.
Please note: the volume is placed before the effects sec-
tion, thus you can use the volume knob also to measure
the effects. If you have a heavy feedback from the flanger you can
herewith avoid distortion. And most important: the volume settings
will be stored separately for every preset.
17