English; General Description (Fig. 1) - Philips 8000-Serie Benutzerhandbuch

EnGlish

6
introduction
Thank you for buying this Philips ironing system. Please read these
instructions for use, as they contain information about the surprising
features of this ironing system and some tips to make ironing easier and
more enjoyable.
The powerful pressurised ironing system produces non-stop steam to
make ironing easier. Thanks to the large water tank you can iron without
interruption. When the water tank is empty you can detach it and refill it
immediately.
We hope you will enjoy using this ironing system.

General description (Fig. 1)

Supply hose
A
Handle with soft grip (GC8261/GC8260 only)
B
Temperature dial
C
Steam activator
D
Steam lock
E
Shot-of-steam button (GC8261/GC8260/GC8220 only)
F
Soleplate
G
Safe storage lock (GC8261/GC8260 only)
H
Iron stand
I
Detachable water tank
J
Filling cup
K
Cord & hose storage hook
L
Calc-Clean rinsing cap
M
Filling opening
N
Water tank release lever
O
Steam tank
P
On/off button with power-on light (GC8261/GC8260/GC8220 only)
Q
Transport handgrip
R
Water tank refill light (GC8261/GC8260/GC8220 only)
S
Calc-Clean light (GC8261/GC8260 only)
T
Mains cord
U
Steam buttons (+/-) (GC8261/GC8260/GC8220 only)
V
Steam tank control panel with steam light (GC8261/GC8260/GC8220
W
only)
- p = maximum steam
- [ = moderate steam
- ] = minimum steam
- a = no steam
On/off switch (GC8210 only)
X
important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the type plate corresponds to the
,
local mains voltage before you connect the appliance.
Only connect the appliance to an earthed wall socket.
,
Do not use the appliance if the plug, the cord, the supply hose or
,
the appliance itself shows visible damage, or if the appliance has been
dropped or is leaking.