Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CROSSOVER WIRING
Crimp the INPUT-wire and the supply line from the radio using the provided plugs. The
n
brown marked wire is minus. Finally connect the tweeter wire.
MOUNTING THE DOOR PANEL
The install of the speaker system is complete. Follow the steps in reversed way to re-
n
mount the door panel.
TESTING THE INSTALLED SYSTEM
Slowly turn up the volume of your head unit, and listen for distorted sounds. If everything
appears to be okay and it just sounds right, check out the speaker balance of the left and
right side by adjusting the balance control of your headunit. Shifting the balance to the left
channel should provide you with sounds coming solely from the left speaker system, while
shifting the balance to the right should do the same for the right speakers. If anything
appears to be wrong, you must recheck the wiring of the x-overs, the amp or the mid/
woofers.
TECHNICAL SPECIFICATIONS
Mid Woofer
Mounting depth:
Mounting diameter:
Max. power handling:
Power handling:
Sensitivity 1W/1m:
Nominal impedance:
Frequency response:
Tweeter
Overall diameter
Mounting height (flat surface)
AC26E46 V-Fit Manual.indd 9
63 mm
138 mm
160 W
120 W RMS
91 dB
4 ohms
50 Hz – 25 kHz
45 mm
23 mm
– 9 –
12.02.2008 17:09:20 Uhr
Werbung
Inhaltsverzeichnis
