INSTALLATION
ConnectaUSBdongle
1
Insert the USB dongle in the socket »USB1«
or »USB2(HDD)« of the television.
Registertheremotecontrol
1
Press and hold »AVSYNC« on the remote
control.
– The blue display on the dongle flashes.
2
While keeping the
mote control pressed down, press and hold
USB dongle lock button for 3 seconds.
Notes:
If the remote control display is red, registra-
7
tion is not successful, please repeat the pro-
cess.
After
successful
7
»VR Remote Status« is displayed in the
»SETTINGS« menu.
The registration can be checked by selecting
7
the main menu with »MENU«, selecting the
menu option »SETTINGS« with »
and confirming with »OK«. Then select the
line »VR Remote Status« with »
- ------------------------------------------------------------------------------------------------------------------
»AV
SYNC« on the re-
registration
the
line
« or »
V
Λ
« or »
«.
V
Λ
AllLEDstatusanddescription
LEDstatus
Buzzer + RED LED flash
(fast).
(It will continuous until
user push any button of
remote)
BLUE LED flash (fast)
(just once).
RED LED flash every 1
second for 5 times, stop
for 10 seconds and
repeat.
RED LED on continuous.
BLUE LED on continuous
(until unplug the cable)
BLUE LED flash fast
while sync and continu-
ous on until sync com-
plete. Time out 5 sec
and led off
Remotecontrollocator
This feature allows you to locate the remote cont-
rol if you have lost it.
1
Press the button on the USB dongle.
– Remote control will emit a sound after a
short while.
2
Press any key on the remote control after you
have found it to stop the buzzer.
«
Description
Remote control Locator.
Key buttons transmission.
Battery low.
Battery charging.
Battery charging full.
SYNC
11
ENGLISH